Repair Parts

Fixmykite.com 7mm Valve 90-Degree Adapter Fitting (set of 5)
In Stock: 946

FixMyKite.com L-Stem Adapters are "L" shaped stems that will fit into the Multi-option valve when cut down, or any standard 7mm Valve.

Your Price: : $3.00
Fixmykite.com 9mm Valve 90-Degree Adapter Fitting (set of 5)
In Stock: 697

FixMyKite.com L-Stem Adapters will fit in the standard 9mm valves to make it a one-pump connection.

Your Price: : $3.00
Fixmykite.com 9mm Valve Caps (set of 5)
In Stock: 641

9mm Valve Caps are a perfect replacement for broken or worn out ones.

Your Price: : $3.00
Aquaseal Repair Adhesive
Previous1 of 2Next
In Stock: 0

Aquaseal Urethane Repair Adhesive & Sealant. The industry standard for maximum strength repairs to wet suits, dry suits and all water sports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. 

Your Price: : $7.25
Tenacious Tape Iron-On Neoprene Patch
Previous1 of 5Next
In Stock: 4

Previously known as Iron Mend, the Tenacious Tape Iron-On Neoprene Patch can fix rips, holes and tears on anything made of neoprene to provide strong, flexible, permanent repairs. Tenacious Tape may be used to repair neoprene dry suits, wet suits, waders, neoprene gloves and boots, orthopedic supports, and lycra body suits. The Tenacious Tape increases garment life and the stretch fabric allows flexibility and comfort.

Your Price: : $12.50
Kitefix GluFix Adhesive
In Stock: 13

Glufix is the only adhesive specially conceived for kitesurfing equipment. Ultra resistant and flexible, Glufix will allow you to make permanent and durable repairs on your kitesurf equipment. Used with Fiberfix, one Glufix tube can allow you to repair a tear as long as 4’ long! 

Your Price: : $14.49
PKS One Pump Hose Kit

The PKS One Pump Hose Kit has all you need to replace the hoses and clips on your kite with an external one pump system. This kit works on most kites (except Airush, Blade, Epic, Gaastra which need larger diameter hose); only Naish kites with the internal Octopus valves and older kites where you pump each strut separately don't need hoses at all. Easy to use and fits like the original factory set. Choice of 3 or 5-strut kits.

Your Price: : $14.95
PKS One Pump Hose by the foot
Previous1 of 3Next

PKS One-Pump Hose is a heavy-duty flexible hose with higher density than standard factory one-pump hose. This means it will not just be the only replacement hose you will ever want to use, it will also last years and years. In 2 sizes: Inner Diameter (ID) 1/4" or 3/8" (6.35 or 9.5mm).

 

Your Price: : $4.95
PKS Neoprene One-Pump Clamp Cover
In Stock: 137

PKS Neoprene Covers are made to cover the plastic clamps on most any external one-pump system since 2006.  This helps protect the rough edges and corners of the Clamp from accidentally cutting, ripping, or putting direct pressure on your canopy when the kite is folded up.     

Your Price: : $4.00
Racer-Back Clamcleat
In Stock: 4

The Racer-Back Clamcleat is the most trusted cleat in Kiteboarding and used by many top brands such as Ozone. Amsteel/Chickenloop line can be woven through the back of cleat to secure it in place while the front side with the teeth is used as a depower cleat.

Your Price: : $27.00
Fixmykite.com Microhook Braiding Kit
In Stock: 73

With the Fixmykite.com Microhook braiding tool you can quickly fix a braided Spectra fly line on the spot. This kit includes a microhook braiding tool, instructions, and pigtail extender.

Your Price: : $12.00
Fixmykite.com Bridle Repair Kit
Previous1 of 2Next
In Stock: 79

The FMK Bridle Repair Kit is the perfect accessory for you kite safari. With this kit you can make temporary repairs to keep your kite vacation going.

A simple to use system for bridle repairs, this system uses a loop/loop bridle link and a single loop/knot bridle line. Combining the two, you can replace a bridle line on the beach without taking the entire bridle apart.

Included:

2mm Sheathed Dyneema Bridle Line in your choice of 5,10 or 1...

Your Price: : $15.00
Ozone Depower Stopper Ball
Previous1 of 3Next
In Stock: 7

The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap. It is simple and incredibly easy to use.

Your Price: : $9.00
Stopper Ball (Parrel Bead) 20mm
In Stock: 44

These parrel bead stopper balls are UV stable and impact resistant. They measure 20mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.

Your Price: : $3.00
Ozone Trimmer Bracket Stopper Ball
Previous1 of 2Next
In Stock: 10

The Ozone Trimmer Bracket Stopper Ball is made from strong, durable and high quality plastic. This stopper ball is located at the connection point between the flag-out bungee line and the fly line right at the trimmer bracket.

Your Price: : $3.00
Ozone Stainless Steel Trimmer Bracket
Previous1 of 2Next
In Stock: 9

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball sold separately.

Your Price: : $25.00
2014+ Ozone Contact Bar Flag Out Ring with Swivel
Previous1 of 2Next
In Stock: 7

The Contact Bar Stainless Steel Flag Out Ring with Swivel attaches at the base of the flag out bungee that runs through the chickenloop. This swivel ring work on all 2014 and newer Contact Water and Snow bars.

Your Price: : $20.00
Stainless Steel Ring, 3/4
In Stock: 178

Stainless steel rings are useful replacements in many bar/line set-ups and Depower Replacement lines. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.

  • 3/4-Inch Inner Diameter (ID)
  • 1-Inch Outer Diameter (OD)
Your Price: : $3.00
Stainless Steel Rectangle Ring, 1
In Stock: 219

Stainless steel square rings are useful replacements in many bar/line set-ups and Depower Replacement lines.

 

Your Price: : $4.00
Stainless Steel Figure-8 Ring, 3/4
In Stock: 17

Stainless steel Figure-8 rings are useful replacements in many bar/line set-ups and Depower Replacement lines. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.

Your Price: : $5.00
Large Carabiner Clip
Previous1 of 2Next
In Stock: 33

The Carabiner Clip is ideal for extensive multiple functions and great to have in a pinch. These carabiners don't have a closed loop and are made to easily change out on different material without the need to restitch or sew material.

Your Price: : $6.95
Small Carabiner Clip
Previous1 of 2Next
In Stock: 37

The Carabiner Clip is ideal for extensive multiple functions and great to have in a pinch. These carabiners don't have a closed loop and are made to easily change out on different material without the need to restitch or sew material.

Your Price: : $8.95
Fixmykite.com Line Sleeving Kit
In Stock: 52

We have had many people ask us what they need to do about worn out sleeving ends or a broken line that's close to the end.  Using the Fixmykite.com Pre-Sleeve Kit and the following steps, you can easily replace your sleeved ends or shorten your fly lines and re-sleeve them anywhere you are to get you back on the water in no time.

 

Your Price: : $7.99
PKS KISS Chickenloop Quick Release System
In Stock: 9

There's a new quick release system on the market aimed at keeping it as simple as possible: the PKS KISS Loop. Jeff Howard is always working on new things and his most recent project is designing the most simple quick release the kite industry has seen. It's recommended for experienced kiters who want to build the most minimal and easy to use bar setup for foiling and light wind use.

Your Price: : $70.00
Ozone Megatron Chickenloop V4 Click-In Loop
In Stock: 0

Replacement Ozone Megatron Chickenloop V4 Click-In Loop assembly. This part includes the push-away release system, harness loop, medium lock tube, and PU-covered Amsteel depower line. The chickenloop works as a replacement for Contact Bars Water, Foil Freeride, Race, and Foil Race V4 bars.

Your Price: : $180.00
2014+ Ozone Megatron II Chickenloop
In Stock: 1

Replacement Ozone Megatron II Chickenloop assembly. This part includes the push-away release system, chickenloop base, lock tube, and PU-covered Amsteel depower line. The chickenloop works as a replacement for 2014 and newer Contact Water, Snow, and Race bars and can also be retro-fitted to older model bars.

Your Price: : $80.00
Ozone Megatron Chickenloop V4 Click-In Loop Upgrade Retrofit Kit, Freeride
In Stock: 3

The Ozone Megatron Chickenloop V4 Click-In Loop retrofit kit includes the push-away release system, medium harness loop with lock tube, PU-covered Amsteel depower line, cleat trim line, stainless steel swivel ring, and flag out bungee line. The chickenloop retrofit kit works as a replacement for Contact Water and Foil Freeride V4 bars.

Your Price: : $220.00
2014-2018 Ozone Megatron II Chickenloop Harness Loop and Lock Tube

Replacement Ozone Chickenloop base and lock tube. This replacement works on 2014-2018 Ozone Contact Water, Snow, and Race bars.

Your Price: : $30.00
Ozone Megatron Chickenloop V4 Harness Loop and Lock Tube
Previous1 of 2Next

Replacement Ozone Chickenloop V4 harness loop and lock tube. This replacement works on Ozone Contact Water, Foil Freeride, Snow, Race, and Foil Race bars.

Your Price: : $45.00
Ozone Megatron Chickenloop V4 Click-In Loop Upgrade Retrofit Kit, Race
In Stock: 4

The Ozone Megatron Chickenloop V4 Race Click-In Loop retrofit kit includes the push-away release system, small harness loop with lock tube, PU-covered Amsteel depower line, stainless steel swivel ring, and flag out bungee line. The chickenloop retrofit kit works as a replacement for Contact Race and Foil Race V4 bars.

Your Price: : $220.00