Skywatch Wireless Bluetooth BL500 Windmeter Anemometer: Wind Speed, Temperature, Humidity, Pressure, UV Index$224.95
FixMyKite.com L-Stem Adapters are "L" shaped stems that will fit into the Multi-option valve when cut down, or any standard 7mm Valve.
FixMyKite.com L-Stem Adapters will fit in the standard 9mm valves to make it a one-pump connection.
9mm Valve Caps are a perfect replacement for broken or worn out ones.
Aquaseal Urethane Repair Adhesive & Sealant. The industry standard for maximum strength repairs to wet suits, dry suits and all water sports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses.
Previously known as Iron Mend, the Tenacious Tape Iron-On Neoprene Patch can fix rips, holes and tears on anything made of neoprene to provide strong, flexible, permanent repairs. Tenacious Tape may be used to repair neoprene dry suits, wet suits, waders, neoprene gloves and boots, orthopedic supports, and lycra body suits. The Tenacious Tape increases garment life and the stretch fabric allows flexibility and comfort.
Glufix is the only adhesive specially conceived for kitesurfing equipment. Ultra resistant and flexible, Glufix will allow you to make permanent and durable repairs on your kitesurf equipment. Used with Fiberfix, one Glufix tube can allow you to repair a tear as long as 4’ long!
The PKS One Pump Hose Kit has all you need to replace the hoses and clips on your kite with an external one pump system. This kit works on most kites (except Airush, Blade, Epic, Gaastra which need larger diameter hose); only Naish kites with the internal Octopus valves and older kites where you pump each strut separately don't need hoses at all. Easy to use and fits like the original factory set. Choice of 3 or 5-strut kits.
PKS One-Pump Hose is a heavy-duty flexible hose with higher density than standard factory one-pump hose. This means it will not just be the only replacement hose you will ever want to use, it will also last years and years. In 2 sizes: Inner Diameter (ID) 1/4" or 3/8" (6.35 or 9.5mm).
PKS Neoprene Covers are made to cover the plastic clamps on most any external one-pump system since 2006. This helps protect the rough edges and corners of the Clamp from accidentally cutting, ripping, or putting direct pressure on your canopy when the kite is folded up.
The Racer-Back Clamcleat is the most trusted cleat in Kiteboarding and used by many top brands such as Ozone. Amsteel/Chickenloop line can be woven through the back of cleat to secure it in place while the front side with the teeth is used as a depower cleat.
We have had many people ask us what they need to do about worn out sleeving ends or a broken line that's close to the end. Using the Fixmykite.com Pre-Sleeve Kit and the following steps, you can easily replace your sleeved ends or shorten your fly lines and re-sleeve them anywhere you are to get you back on the water in no time.
With the Fixmykite.com Microhook braiding tool you can quickly fix a braided Spectra fly line on the spot. This kit includes a microhook braiding tool, instructions, and pigtail extender.
The FMK Bridle Repair Kit is the perfect accessory for you kite safari. With this kit you can make temporary repairs to keep your kite vacation going.
A simple to use system for bridle repairs, this system uses a loop/loop bridle link and a single loop/knot bridle line. Combining the two, you can replace a bridle line on the beach without taking the entire bridle apart.
2mm Sheathed Dyneema Bridle Line in your choice of 5,10 or 1...
The Ozone Stopper Ball is made from strong, durable and high quality plastic. Once the hex screw is tightened it does not move. This stopper ball is located at the base of the clamcleat and end of the depower pull strap. It is simple and incredibly easy to use.
These parrel bead stopper balls are UV stable and impact resistant. They measure 20mm across, have a center hole diameter of 5mm, and the maximum rope size is 3/16 inches.
The Ozone Trimmer Bracket Stopper Ball is made from strong, durable and high quality plastic. This stopper ball is located at the connection point between the flag-out bungee line and the fly line right at the trimmer bracket.
Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar. Trimmer bracket stopper ball sold separately.
The Contact Bar Stainless Steel Flag Out Ring with Swivel attaches at the base of the flag out bungee that runs through the chickenloop. This swivel ring work on all 2014 and newer Contact Water and Snow bars.
Stainless steel rings are useful replacements in many bar/line set-ups and Depower Replacement lines. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.
Stainless steel square rings are useful replacements in many bar/line set-ups and Depower Replacement lines.
Stainless steel Figure-8 rings are useful replacements in many bar/line set-ups and Depower Replacement lines. Stainless steel ensures long-life in water, and hardened steel means it can take heavy loads and last under great pressure.
The Carabiner Clip is ideal for extensive multiple functions and great to have in a pinch. These carabiners don't have a closed loop and are made to easily change out on different material without the need to restitch or sew material.
Replacement Ozone Megatron Chickenloop V4 Click-In Loop assembly. This part includes the push-away release system, harness loop, medium lock tube, and PU-covered Amsteel depower line. The chickenloop works as a replacement for Contact Bars Water, Foil Freeride, Race, and Foil Race V4 bars.
Replacement Ozone Megatron II Chickenloop assembly. This part includes the push-away release system, chickenloop base, lock tube, and PU-covered Amsteel depower line. The chickenloop works as a replacement for 2014 and newer Contact Water, Snow, and Race bars and can also be retro-fitted to older model bars.
The Ozone Megatron Chickenloop V4 Click-In Loop retrofit kit includes the push-away release system, medium harness loop with lock tube, PU-covered Amsteel depower line, cleat trim line, stainless steel swivel ring, and flag out bungee line. The chickenloop retrofit kit works as a replacement for Contact Water and Foil Freeride V4 bars.
Replacement Ozone Chickenloop base and lock tube. This replacement works on 2014 and newer Ozone Contact Water, Snow, and Race bars.
Replacement Ozone Chickenloop V4 harness loop and lock tube. This replacement works on Ozone Contact Water, Foil Freeride, Snow, Race, and Foil Race bars.
Forgot your password?